Medical and engineering AM filament with radiopaque, color and reinforcement additives. The compounding and dimensional discipline of medical extrusion, brought to fused filament fabrication (FFF).
Experience
Jonathan's high-temperature extrusion work at International Polymer Engineering spanned medical, aerospace and additive manufacturing. At Spectrum Plastics Group he launched AM FFF filaments for medical prototyping.
Materials and additives
High-heat polymers, PEEK included, can be extruded into filament as well as tubing and profiles. They can be colored and compounded with radiopacifiers, electrically and thermally conductive additives, and various physical reinforcements. There are limits: compounding can double or triple material cost, and because processing temperatures are high, some colorants and additives cannot survive, which limits colors and PMS matching. Several high-heat polymers do not have neutral natural colors, which also affects color matching.
High-heat and reinforced filament
An extruder experienced with PEEK can run it into just about any configuration a low-heat material allows, filament included. Some aspects differ from low-heat counterparts, starting with equipment: PEEK processes near 700°F on extruders with higher-powered heaters and low-thermal-expansion construction. PEEK's opaque beige also limits how light or vibrant its colors can be. Reinforced compounds bring their own trade-offs. In Jonathan's Spectrum study of glass-reinforced tubing, the fibers added stiffness but cut elongation sharply and made small parts fragile, and custom tooling was needed to manage the fibers and the surface finish.
The problems we solve
- Filament with radiopaque, color and reinforcement additives
- Dimensional control carried over from medical tubing extrusion
- High-heat polymers in filament form
- Reinforced compounds, where managing fibers drives tooling and finish
How to start
Book a 30-minute intro call or send a note. You'll hear back from Jonathan directly.
Related materials
Related reading
Have a part, a material question, or a line to scope? Book a 30-minute call with Jonathan or send a note.
